VH GROUP 2
The Group 2 was the middle level car of the VH series and featured all of the extras of the Group 1, but also received some extra modifications including blue printed cylinder heads, extractors, chromed rocker covers, gas flowed inlet manifold, front fender windsplitters, rear deck spoiler and Group 2 decals.
Many buyers opted to further option their Group 2's so some were fitted with the Group 3's Irmscher road wheels and additional body components.
All these modifications came to $3250 over the price of the base SS and again, only a handful of these cars would be produced, initally in red and later in white also
VH Group 2
VEHICLE FACTORY SPECS
4.142 Litre (253 Cubic Inch) HDT modified pushrod V8, overhead valves - 2 valves per cylinder; Bore x Stroke (mm): 92.07 x 77.8; Compression Ratio 9.2:1; Maximum Power: 152.9kw; Maximum Torque: Unknown
4 barrel Rochester Carburettor and port matched inlet manifold. HDT Cold Air induction system with chrome air cleaner lid.
M21 4 Speed
Final Drive: 3.08
Single Dry Plate
Power assisted rack and pinion
Front: Fully independant. Macpherson struts with coil springs and anti-roll bar. Rear: Live axle located by trailing arms and Panhard rod. Coil springs and anti-roll bar.
Split circuit hydraulic system with power booster.
Front: 281mm Ventilated discs.
Rear: 281mm Discs
WHEELS & TYRES
14 x 6 VH SS Alloy's
Base Price: $13,385 Options: SS Group 2 modifications $3250.